The Arduino Leonardo is a microcontroller board based on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
The Leonardo differs from all preceding boards in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Leonardo to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. It also has other implications for the behavior of the board; these are detailed on the getting started page. We no longer carry the Leonardo without headers.
NOTE: You will need Arduino software v1.0.2 or later to program the Leonardo.
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-20V
Digital I/O Pins: 20
PWM Channels: 7
Analog Input Channels: 12
DC Current per I/O Pin: 40 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 32 KB (ATmega32u4) of which 4 KB used by bootloader
SRAM: 2.5 KB (ATmega32u4)
EEPROM: 1 KB (ATmega32u4)
Clock Speed: 16 MHz
Nama / Alamat Lengkap / Nama Produk / Jumlah -- kirim ke 08121314327
Jl. Tanjung RT003 RW001 no.14 Jatipulo
Grogol Petamburan, Jakarta barat, 11430 Bandung Jl. Aceh no.24A Pasar Besi Kebon Sirih, Bandung 40117 Surabaya Jl. Gebang Lor No.29 ( sebelah barat bundaran kampus ITS) Surabaya 60117